Trend IMC-101 Bedienungsanleitung PDF herunterladen (Seite 8)

STEP 1:

Insert the top of the DIN-Rail into the

slot just below the stiff metal spring.

STEP 2:

The DIN-Rail attachment unit will

snap into place as shown below.

To remove MOXA Industrial Media Converter from the DIN-Rail, simply

reverse Steps 1 and 2 above.

Wall Mounting (OPTIONAL)

For some applications, you will find it convenient to mount MOXA Industrial

Media Converter on the wall, as illustrated below.

STEP 1:

Remove the aluminum DIN-Rail attachment plate from MOXA Industrial

Media Converter, and then attach the wall mount plates, as shown in the

diagrams below.



STEP 2:

Mounting MOXA Industrial Media Converter on the wall

requires 4 screws. Use the IMC, with wall mount plates

attached, as a guide to mark the correct locations of the 4

screws. The heads of the screws should be less than 6.0

mm in diameter, and the shafts should be less than 3.5

mm in diameter, as shown in the figure at the right.

NOTE

Test the screw head and shank size by inserting the screw

into one of the keyhole shaped apertures of the Wall

Mounting Plates, before it is screwed into the wall.

Do not screw the screws in all the way—leave a space of

about 2 mm to allow room for sliding the wall mount

panel between the wall and the screws.



-- 4 --

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 18 19

Keine Kommentare

Trend IMC-101 Bedienungsanleitung Seite 8