Trend ENCLS_... Bedienungsanleitung PDF herunterladen

ENCLS/... Enclosures Installation Instructions TG103175 Issue 1/A 1/7/96 1

Installation Instructions

ENCLS/...

Enclosures

Important: keep these instructions with the unit.

Because these instructions contain information that may be required after installation they should be kept with the unit, or in a location

where they can quickly be found.

Installation

Mount the enclosure in position

Mount the ENCLS in position. The location should provide safe

access for maintenance, and a suitable operating environment.

It is recommended that the installation should comply

with the HSE Memorandum of Guidance on Electricity

at Work Regulations 1989.

(2) Insert suitable expanding fixing (e.g. rawlbolt)

through each hole in the enclosure, into the

mounting holes, and tighten.

Fit the item into the enclosure

(3) If fitting an IQ25x controller into the enclosure

remove the DIN rail by undoing the two fixing

screws.

(4) Locate the pre-drilled mounting holes in the

enclosure’s backplate needed by the item being

mounted in the enclosure. The table lists the

types of items that can be fitted in the enclosure.

(1) Drill 4 off 12 mm holes as shown.

IQ91e IQ131+

IQ92e IQ151+

IQ93e IQ241

IQ101+ IQ250

IQ102+ IQ251

IQ111+ NETB/NETBB

(5) Insert the screws provided through the mounting

holes in the controller or NETB, into the pre-drilled

mounting holes in the enclosure’s backplate.

Note

that it may be necessary to remove the controller’s

covers to gain access to the mounting holes; this

is described in the installation instructions for

the particular controller or NETB.

Connect the item to the Display Panel, or Network Display Panel

(6) Connect the DP, or NDP in the door of an

ENCLS/FPK, or ENCLS/NDP to the controller or

NETB/.. mounted inside the enclosure. This is

described in the controller’s or NETB installation

instructions, or data sheet.

560 mm

1 2

Inhaltsverzeichnis

Seite 1 - Enclosures

ENCLS/... Enclosures Installation Instructions TG103175 Issue 1/A 1/7/96 1Installation InstructionsENCLS/...EnclosuresImportant: keep these instructio

Seite 2 - Installation (Continued)

Installation InstructionsENCLS/... ENCLOSURES2 ENCLS/... Enclosures Installation Instructions TG103175 Issue 1/A 1/7/96Trend Control Systems Ltd reser

Kommentare zu diesen Handbüchern

Keine Kommentare

Trend ENCLS_... Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Zubehör für elektrische Trend ENCLS_... herunter. TREND ENCLS_... User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Zubehör für elektrische Trend ENCLS_...